Copper Integral Low Fin Tube for Refrigeration Industries - Integral Low Finned Tube
low fin tubes for heat exchangers
,integral low fin tubes
DELLOK Copper Integral Low Fin Tube for Refrigeration Industries
Integral low fin tubes are produced by cold rolling fins directly from the wall of the base tube, creating a single-piece, metallurgically continuous fin-to-tube bond. This construction delivers reliable heat transfer performance and is well suited to refrigeration, HVAC, and other compact heat exchanger applications.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff.
Our production infrastructure includes:
- 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
Annual production capacity exceeds 12 million meters. Quality is our eternal pursuit: meticulous workmanship, a standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it runs throughout the entire production process. Each batch of pipes is sampled and tested, and records are retained as a quality guarantee for the final product.
The fins are rolled out from the wall of the tube and are therefore integral with the tube. Because the fins are formed from the base tube by rolling out material from its wall, the wall thickness under the finned section is reduced compared with the wall thickness at the plain ends.
These fin tubes can be manufactured from most tubular materials, and the hardness of the material typically determines the finning code or fin profile:
- Harder materials such as nickel alloys, stainless steel, and titanium are supplied with higher fin density (26, 28, or 30 FPI). The shallow profile reduces work hardening of the material and helps eliminate the possibility of root fin cracking.
- Softer materials such as carbon steel, copper, and copper alloys are supplied with a deeper profile, giving lower fin density (16 or 19 FPI).
These tubes can also be supplied with intermediate plain landing as well as U-bend, where the U-bend portion can be finned or un-finned.
Four (4) finning lines are in operation, with a total monthly production capacity of 80,000 meters.
- Manufacturing process: Cold rolling of fins on the base tube itself
- Fin-to-tube bond: Not applicable — the fin is made from the base tube itself
- Heat transfer efficiency: Good
- Mechanical resistance: Good
- Corrosion protection: Moderate
- Temperature range: Up to a maximum of 415 °C
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 12.7 – 31.75 mm | 1/4" – 1 1/4" (NPS) |
| Tube Wall Thickness | 1.65 – 3.0 mm | 0.065" – 0.118" |
| Tube Length | ≤ 18,500 mm | ≤ 60.7 ft |
| Fin Thickness | 0.3 – 0.5 mm | 0.0118" – 0.0197" |
| Fin Height | 0.9 – 1.3 mm | 0.0354" – 0.0512" |
| Fin Pitch | 666 – 1111 FPM | 16 – 30 FPI |
| Fin Type | Integral Low | — |
| Tube Material | C.S., S.S., A.S., Copper, Titanium | — |
| Applied Temperature | 415 °C | — |
1. What is fin efficiency?
Fin efficiency is defined as the ratio of the actual heat flow of the fin to that which would be obtained with a fin of constant temperature uniformly equal to the base surface temperature — that is, a fin with infinite thermal conductivity.
2. What are low finned tubes?
A low finned tube is a finned tube obtained through plastic cold deformation. The method consists of realizing, from a smooth tube, fins with a particular geometric form without removing material. This plastic deformation increases heat exchange efficiency and allows the heat exchanger size to be reduced.
3. How are low fin tubes made?
Low finned tubes involve rotational processing of the outer surface of steel tubes to create a fin shape. A steel pipe length of 25.4 mm (1 inch) per fin with 19 fins is a design often used. Units with 26 fins can also be produced.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube