Aluminum Stainless Steel Extruded Fin Tube for Air Chiller Heat Transfer Applications
Stainless Steel Extruded Fin Tube
,Aluminum Extruded Fin Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our facilities include 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines — among them an imported line from the American brand McElroy — delivering an annual production capacity of over 12 million meters.
Quality is our eternal pursuit. Meticulous workmanship, a standardized management system, and systematic quality assurance represent Dellok (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection; it runs throughout the entire production process. We implement a comprehensive quality control and assurance system, sampling and testing each batch of pipes and keeping records as a guarantee of final product quality.
The composite fin tube offers the following characteristics:
- High heat transfer performance with low contact resistance
- Large fin-to-tube contact area that is close and reliable
- Good corrosion resistance and stable long-term service performance
- Good fin rigidity that resists deformation
It is widely used in the steel, petroleum, chemical, machinery, shipbuilding, power station, hospital, and food industries.
This fin type is formed from a bi-metallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is created by rolling material from the outside of the exterior tube, producing an integral fin with excellent heat transfer properties and longevity. Extruded fins offer excellent corrosion protection for the base tube. The maximum operating temperature for this fin type is 280°C.
| Fin Material | Aluminum |
|---|---|
| Tube Materials | No theoretical limits |
The fins are rotary cold rolled from a smooth, thick-walled hollow blank tube slid over the core tube. Three multi-spindle disc packs extrude the hollow blank tube into helical high fins. During this process, the inner diameter of the hollow blank tube is reduced and simultaneously pressed onto the core tube, resulting in a mechanically solid joint.
| Fin Material | Aluminum / Copper |
|---|---|
| Core Tube Material | Carbon Steel / Carbon Alloy Steel / Stainless Steel / Nickel Alloys / Copper / Copper Alloys / Titanium |
- 100% fin-to-tube bond providing exceptional efficiency and longevity
- Excellent corrosion protection on the base tube
- Easy to clean with a high-pressure water jet without deforming the fins
- Continuous outer sleeve eliminates galvanic corrosion between the tube and fins
- Bonding of the outer and inner tubes removes the risk of contact loss with the aluminum due to thermal stress, and the fins are vibration resistant
- Higher heat transfer performance for the life of the unit
- Extruded finned tubes are commonly used in applications with temperatures up to 325°C
Primary extruded finned tubes are used in high-temperature and corrosive atmospheric conditions, such as operating temperatures below 300°C or offshore applications. Typical uses include heat pipe air-to-air heat exchangers for HVAC applications, air dehumidification in air treatment plants, and energy recovery in air exhaust systems.
This fin design is the least economical compared with other fin types, mainly due to the increased amount of aluminum used (around 40%) and the additional labor required during manufacturing. However, this increased cost can be offset by using a lower-grade parent tube material.
| Fin Type | Extruded Fin Tube |
|---|---|
| Tube Material | Copper, copper nickel, stainless steel, titanium, etc. |
| Fin Material | Copper, aluminum |
Aluminum extruded finned tubes use a base tube covered with an aluminum tube (the base tube may be carbon steel, stainless steel, or copper) that is machine-extruded to form a tube fin. The fin base and the tube outer wall fit closely together, allowing this fin tubing design to achieve a high heat transfer coefficient and strong heat transfer performance.
Aluminum extruded finned tubes — also called integral finned tubes — are produced by covering the base tube with an aluminum tube and extruding it to form a tube fin, with the fin base and tube outer wall closely fitted. Extruded finned tubes can be made from iron, copper, or aluminum tube by compound rolling, offering tight bonding, low thermal resistance, good heat transfer performance, high strength, low flow loss, strong anti-corrosion performance, resistance to deformation under long-term hot and cold working conditions, and a long working life.
Production flow: pipe line → compressing or rolling → strip peeling → washing → pressure test → blast blowing → packaging.
The extruded fin tube is formed from a bi-metallic tube consisting of an aluminum outer tube and an inner tube of almost any material. The fin is formed by rolling the material from the outside of the outer tube to provide an integrated fin with excellent heat transfer performance and service life. The extruded fins provide excellent corrosion protection for the base tube.
The production method of the composite finned tube mainly uses the extrusion method: the bi-metallic composite tube is lined with a mandrel and driven by the rotation of the roller blade. The composite tube is processed on its outer surface through the cavity formed by the rolling groove and the core head to produce fins. The heat transfer tube produced by this method is an organic whole with its outer tube and fins, so there is no contact heat loss, resulting in good performance and high heat transfer efficiency.
A: Generally, samples require 1–3 days and mass production requires 15–30 days, depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, and others. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube