ASTM A215 Extruded Fin Tube for Heat Exchanger with Customization Available Finned Tube
ASTM A215 Extruded Fin Tube
,Heat Exchanger Extruded Fin Tube
DELLOK ASTM A215 Extruded Fin Tube for Heat Exchanger
Manufactured by YONGHUI RADIATING PIPE MANUFACTURING CO., LTD., this extruded fin tube is engineered for high-efficiency heat transfer in demanding industrial environments. The fins are formed by roll-forming the outer surface of a seamless plain tube, creating an integrated, inseparable fin-to-tube structure that eliminates contact resistance and maximizes thermal performance.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing operation with 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. Our production infrastructure includes:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of 12 million meters and above
Quality is our eternal pursuit. Our production workshop combines meticulous workmanship, a standardized management system, and systematic quality assurance. Quality control at DELLOK is not limited to final inspection — it extends throughout the entire production process. Each batch of pipes is sampled and tested, with records maintained as a quality guarantee for the final product.
The product images displayed on this page are for reference only. The specific product model, size, specification, material, and other technical information must be customized according to your requirements.
- Optimized inner-to-outer surface ratio
- High heat exchange rate
- Enhanced structure due to the roll-forming process
- Flexible configuration as straight tube, bent, or coiled heat exchangers
- Low heat resistance between fins and tube
- Strong resistance to shock and thermal expansion and contraction
- Cost and energy saving due to long service life and high exchange rate
Copper-aluminum composite finned tube is a copper-aluminum composite tube that is rolled out of fins after compounding. It offers a close combination, small thermal resistance, good heat transfer performance, high strength, small flow loss, and strong corrosion resistance. It is not easily deformed under long-term cold and hot working conditions and delivers a long working life.
The whole rolled fin is smooth without burr or wrinkle and is easy to clean. In heating and air-conditioning engineering, wet cooling makes it easy to remove condensation from the outer fin surface. In heat exchange heating and other applications, it resists dust accumulation and fouling.
The finned tube we provide is the Extruded Type, which differs from those produced through HF welding and wrapping methods. The fins are obtained by roll-forming the outer surface of a soft seamless plain tube. This technology simply squeezes the wall thickness, transforming it into straight fins on the tube. As a result, the fin and tube are integrated and inseparable, which avoids heat resistance between fin and tube and optimizes heat exchange efficiency.
Based on this structure, the extruded type can withstand more severe working conditions than other finned tubes. It also demonstrates several unique features, including enhanced physical structure, resistance to vibration, anti-corrosion ability, and long service life.
Under this technology, two major types of finned tubes are available: single metal tubes and bimetallic tubes. The former uses copper, aluminum, or copper-nickel alone. The latter has a core tube on the inside made of harder material; the outer tube is rolled onto the core tube to provide a tight bond and good thermal contact between the two tubes.
Customized finned tubes are available. The specification table is provided below. If required, the fin tube can be made into various forms after the soft annealing process. They can be used for cooling and heating across a large range of conditions — for example, coils in water heaters, oil coolers in large machines, heat transfer parts in boilers and heat recovery systems, and condenser or evaporator parts in the air-conditioning and refrigeration industry.
Our fin tube materials cover Copper (C10200, C12000, C12200), Copper Nickel (C70600), Aluminum (1060), Aluminum alloy, Aluminum-Steel (bimetallic), Aluminum-Stainless Steel (bimetallic), Aluminum-Copper (bimetallic), Aluminum-Copper Nickel (bimetallic), and Copper-Copper Nickel (bimetallic).
The fin tubes available from us cover Integrated Finned Tube of Copper (C10200, C12000, C12200), Cupronickel (C70600), Aluminum (1060), and Aluminum Alloy (AISI6063), as well as Bimetallic Finned Tube such as Copper-Aluminum, Copper Alloy-Aluminum, Steel-Aluminum, Stainless Steel-Aluminum, and Laser Welded Fin Tube using Stainless Steel and Titanium.
We maintain a wide and comprehensive range of products and can produce all relevant types available in the market, as shown in the figure below.
We can package products according to customer requirements to ensure safe arrival under all kinds of transportation scenarios. If you have special packaging requirements, please contact us.
1. What does fin tube mean?
A fin tube is a tube with small fins around its outside surface. These fins act as a mechanism to transfer heat from the material inside the tube to the outside space, or vice versa. Fin tubes are used in applications requiring heat transfer from a hot fluid to a colder fluid through the tube wall. The rate of heat transfer depends on three factors:
- The temperature difference between the two fluids
- The heat transfer coefficient between each fluid and the tube wall
- The surface area to which the fluid is exposed
2. Where is a finned tube heat exchanger used?
Finned tube heat exchangers generally use air to cool or heat fluids such as air, water, oil, or gas, or they can capture or recover waste heat. These heat exchangers are used across a broad range of industries, including oil and gas, power generation, marine, and HVAC&R.
3. What is an extruded fin tube?
Extruded finned tubes are bimetallic tubes whose outer aluminum surface is finned by cold plastic deformation. Two major types are available: single metal tubes (also called mono-metallic fin tubes) and bimetallic tubes (composite extruded fin tubes).
4. Why is aluminum recommended as a fin material?
Good corrosion resistance, formability, and high thermal conductivity make aluminum an ideal material for constructing these heat exchangers. A typical brazed heat exchanger (radiator or condenser) comprises fins, tubes, side plates, and header plates.
5. Where are extruded fin tubes used?
Extruded fin tubes are widely used in the refinery, petrochemical, and chemical industries for:
- Air-cooled condensers
- Air-cooled coolers for products
- Gas coolers
- Gas heaters
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube