Customized Size Stainless Steel Studded Tube Nailhead Tube with Polishing for Heat Transfer Boiler
Boiler Studded Tube
,Nailhead Tube Studded Tube
,Heat Transfer Boiler Studded Tube
Studded tubes are produced by electric-resistance welding studs onto the external surface of a tube. Because the stud welding acts on the entire cross-section of each stud, studded tubes represent the most robust extended-surface tubes available — an important characteristic when severe mechanical loads are expected during service or cleaning.
Studded tubes vary by pattern design, number of rows, spacing between rows, and number of studs per row. Studs are available in a wide variety of sizes, shapes, and materials. They are loaded into an automated electric-welding machine and press-welded as the tube moves longitudinally and circularly according to the required pattern. For special patterns or highly customized applications, studs are set one by one using a manual electric-welding machine.
Heat exchange efficiency increases dramatically when using studded tubes or pipes compared to bare surface pipes — efficiency can increase by 2–3 times or more. By using studded tubes, it is possible to reduce the amount of bare pipe required for the same heat transfer volume, resulting in a more economical solution and lighter overall weight.
Steel studs are automatically resistance-welded to the tube, producing high-quality forge welds. The welding process enables the combination of any grades for studs and tube — carbon steel, low alloy steel, stainless steel, and high nickel alloys.
- Increases the surface area of the tube and protects the tube surface from direct exposure to heat and corrosive environments.
- Reduces the amount of bare pipe used in processes — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes.
- Ideal for processes and applications where dirty fuels are used in harsh environments.
- Manufacturing Process: Electric Resistance Welding
- Fin-to-Tube Bond: Excellent
- Heat Transfer Efficiency: Excellent
- Mechanical Resistance: Excellent — can be frequently cleaned with high-pressure jets unlike other fin tubes, thereby reducing downtime and increasing overall service life.
- Corrosion Protection: Provides excellent corrosion protection to the base tube since the studs entirely cover the base tube (except bare ends).
- Temperature Range: Dependent on the properties of the stud and pipe materials.
High-density crude oil is passed through studded tubes that are heated from the outside. The liquefied product exits from the other end, ready for further processing.
Navy boilers also require studded tubes with oval-shaped studs welded onto them. These are used for heating water in water-tube boilers.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 25–273 mm | 1"–10" (NPS) |
| Tube Wall Thickness | 3.5–28.6 mm | 0.14"–1.1" |
| Tube Length | ≤25,000 mm | ≤82 ft |
| Stud Thickness | 6–25.4 mm | 0.23"–1" |
| Stud Height | 10–35 mm | 0.4"–1.38" |
| Stud Pitch | 8–30 mm | 0.3"–1.2" |
| Stud Type | Cylindrical, Elliptical, Lens type | |
| Stud-to-Tube Surface Angle | Vertical or Angular | |
| Material Combinations | ||
| Stud Material | C.S. (most common grade: Q235B); S.S. (most common grades: AISI 304, 316, 409, 410, 321, 347); A.S. | |
| Tube Material | C.S. (most common grade: A106 Gr.B); S.S. (most common grades: TP304, 316, 321, 347); A.S. (most common grades: T/P5, 9, 11, 22, 91) | |
| Type of Service | High temperature | |
Product Category: Studded Tube
Dellok (YONGHUI Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Nanjing, China. In 2022, we joined HARBIN AIR CONDITIONING CO., LTD. and became the most professional industry manufacturer in China. After many years of development, the company now has 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff.
We operate 4 aluminum processing production lines with an annual processing capacity of more than 20,000 tons; 5 tube-drawing production lines; and 47 fin-tube production lines, including 1 imported production line from the American brand McElroy, with an annual production capacity of 12 million meters or more.
Quality is the theme of our eternal pursuit of excellence.
Q1: Are you a trading company or a manufacturer?
A: We are a manufacturing factory and we can accept OEM orders. You are welcome to visit our factory and check our products.
Q2: Can I have a sample?
A: Yes, you are welcome to place a sample order to test and check quality. Mixed samples are also acceptable.
Q3: What is your lead time for production?
A: Generally, samples require 1–3 days and mass production requires 15–30 days, depending on your request.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube