Customized Industrial Polishing Studded Tube and Studded Pipe for Heat Transfer
DELLOK Supply CS Studded Tube
,DELLOK CS Studded Tube
,Best Price CS Studded Tube
DELLOK Supply Best Price CS Studded Tube — high-quality studded tubes manufactured by YONGHUI Radiating Pipe Manufacturing Co., Ltd. (DELLOK), engineered for superior heat transfer in the most demanding industrial environments.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a leading manufacturer with 66 million yuan in fixed assets, more than 200 employees, and 33 technical specialists. Our production infrastructure includes:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA)
- Annual production capacity of over 12 million meters
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent DELLOK's commitment to excellence. Quality control is not limited to final inspection — it spans the entire production process. Each batch of pipes is sampled, tested, and recorded as a guarantee of final product quality.
Steel studs are automatically resistance welded to the tube, producing high-quality forge welds. The welding process enables the combination of any grades for studs and tube — carbon steel, alloy steel, stainless steel, and high nickel alloys. Alloy steel pipes are stress-relieved after studding, according to the relevant specifications for the class and grade of steel used.
Corrosion protection: If required, the external surfaces of studded tubes can be treated with a protective coating.
Steel studs are welded onto the base tube. Studded tubes can be produced with cylindrical, elliptical, or lens-type studs.
- Satisfying connection surface with minimal heat loss.
- Welding connection rate higher than 90 percent.
- No welding power required; virtually no welding tumor.
- Narrow heated zone on the surface, no melted pool, and no destruction of the base tube structure.
- Welding parameters are strictly set to ensure the quality of bulk studded tubes and to avoid the instability of manual operation.
- Compact design that occupies less space.
- Highly durable construction for long service life.
Studded tubes and studded pipes are widely used in heat recovery applications of petrochemical plants, oil & gas, and chemical processing — mostly in convection ovens, at very high temperatures, and in harsh environments where corrosive elements such as sulfuric acid may be present.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 25~273 (mm) | 1"~10" (NPS) |
| Tube Wall Thickness | 3.5~28.6 (mm) | 0.14"~1.1" |
| Tube Length | ≤25,000 (mm) | ≤82 ft |
| Stud Thickness | 6~25.4 (mm) | 0.23"~1" |
| Stud Height | 10~35 (mm) | 0.4"~1.38" |
| Stud Pitch | 8~30 (mm) | 0.3"~1.2" |
| Stud Type | Cylindrical, Elliptical, Lens type | |
| Stud-to-Tube Surface Angle | Vertical or Angular | |
| Component | Material Options |
|---|---|
| Stud Material | C.S. (most common grade: Q235B); S.S. (most common grades: AISI 304, 316, 409, 410, 321, 347); A.S. |
| Tube Material | C.S. (most common grade: A106 Gr.B); S.S. (most common grades: TP304, 316, 321, 347); A.S. (most common grades: T/P5, 9, 11, 22, 91) |
| Type of Service | High temperature |
Product Category: Studded Tube
Studded tubes are used as a substitute for finned tubes for heat transfer in the petrochemical industry — generally in fired heaters and boilers where the surface is exposed to a very corrosive environment and where very dirty soot formation requires frequent or aggressive cleaning.
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, with a stepping motor and brake motor for indexing. All welding parameters — including the number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is guaranteed by settings made according to process requirements.
The automatic stud feeder was developed by our engineers, combining our extensive experience in manufacturing extended surface with the most modern control technology available on the market. This technology delivers more efficient production and consistent welding quality.
Murphy's studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas.
Studded tubes are a type of metal tube with studs welded onto the metal surface. These studs are arranged in a specific formation throughout the length of the tube. They are often used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating applications.
The heat exchange efficiency is equivalent to 2–3 times that of a bare pipe. Studded tubes are easier to clean, especially in operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil. They increase the film heat transfer coefficient of flue gas to the furnace tube, improve efficiency in heat recovery and direct-flame hostile atmospheres, and reduce the amount of bare pipe used in these processes (the heat transfer surface of one studded pipe is equivalent to the surface of 4 to 10 bare pipes). Studded pipes are ideal for process applications where dirty fuels are used and where harsh environments in terms of temperature and/or corrosion exist. Studded fin tube is a standard frequency electric-resistance-welded studded type surface, normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important factors / process parameters influencing high-frequency welding are: electrical power, pressure applied, welding time, and cooling time. Finding the optimal process parameters will depend on your specific equipment, the materials involved, and the specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you need.
High-frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two plastic parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials. Using a high-frequency electromagnetic field, the material is heated and pressure is added to melt and fuse the two materials together. No external heat is applied; instead, the heat is generated within the materials. During cooling (under continued pressure), the materials are fused together and a weld is created, resulting in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in the processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
We always put quality first for our customers, controlling quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube & strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tube dimension & visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube