Stainless Steel High Density Polishing Studded Tube and Studded Fin Tube for Water Tube Boilers
Water Tube Boilers Studded Tube
,Steel Welded Studded Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) is a leading manufacturer of steel welded studded tubes for water tube boilers, fired heaters, and heat recovery systems. Our studded tubes are engineered for superior heat transfer performance in the most demanding industrial environments.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing operation with 66 million yuan in fixed assets, over 200 employees, and 33 technical staff. Our production infrastructure includes:
- 4 aluminum processing production lines with an annual capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA) with an annual capacity of over 12 million meters
Quality is our eternal pursuit. Our meticulous works, standardized management system, and systematic quality assurance represent DELLOK's commitment to excellence. Quality control is not limited to final inspection — it is integrated throughout the entire production process. Each batch of pipes is sampled, tested, and recorded as a quality guarantee for the final product.
Carbon steel, stainless steel, or aluminum studded tubes with welded structure are essential components of heaters and heat exchanging devices. They are also used in heating furnace convection chambers. Manufactured using hot rolled processing techniques, these tubes employ high-frequency spiral welding technology that enables them to resist wear and transmit high-frequency heat to their steel strip component.
Convenient to install and easy to maintain, studded tubes offer a good heat dissipation area. The smooth internal design ensures low internal flow resistance. Galvanized surface finishing and availability in various lengths and thickness levels are among the unique attributes of these tubes.
Studs are fully automatically welded onto the tubes (pipes) by resistance welding. The welding process is controlled by a PLC program with stepping motor and brake motor indexing. All welding parameters — including number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is guaranteed by settings configured according to precise process requirements.
The automatic stud feeder was developed by our engineers, combining extensive experience in manufacturing extended surfaces with the most modern control technology available. This technology delivers more efficient production and consistent welding quality.
- Increases the surface area of the tube and protects the tube surface from direct exposure to heat and corrosive environments
- Reduces the amount of bare pipes required — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes
- Ideal for processes and applications where dirty fuels are used in harsh environments
- Wear-proof design for extended service life
- High heat transferring capacity for improved thermal efficiency
- Wear-proof design
- High heat transferring capacity
Studded tubes are used as a substitute for finned tubes for heat transfer in the petrochemical industry, generally in fired heaters and boilers where the surface is exposed to highly corrosive environments and where dirty soot formation requires frequent or aggressive cleaning.
Typical applications include:
- Boilers and superheaters
- Gas furnace burners
- Heat exchange equipment
- Chemical equipment
- Heat recovery in the petrochemical industry
- Convection ovens
- Vacuum generators for chemical processing
- Convection sections of fired heaters and boilers exposed to dirty flue gas
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 25–273 mm | 1"–10" (NPS) |
| Tube Wall Thickness | 3.5–28.6 mm | 0.14"–1.1" |
| Tube Length | ≤25,000 mm | ≤82 ft |
| Stud Thickness | 6–25.4 mm | 0.23"–1" |
| Stud Height | 10–35 mm | 0.4"–1.38" |
| Stud Pitch | 8–30 mm | 0.3"–1.2" |
| Stud Type | Cylindrical, Elliptical, Lens type | |
| Stud-to-Tube Surface Angle | Vertical or Angular | |
| Material Combinations | ||
| Stud Material | C.S. (most common grade: Q235B); S.S. (most common grades: AISI 304, 316, 409, 410, 321, 347); A.S. | |
| Tube Material | C.S. (most common grade: A106 Gr.B); S.S. (most common grades: TP304, 316, 321, 347); A.S. (most common grades: T/P5, 9, 11, 22, 91) | |
| Type of Service | High temperature | |
Product Categories: Studded Tube
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, with stepping motor and brake motor indexing. All welding parameters — such as number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is guaranteed by settings configured according to process requirements.
The automatic stud feeder was developed by our engineers, combining extensive experience in manufacturing extended surfaces with the most modern control technology available in the market. This technology has benefited us with more efficient production and consistent welding quality.
DELLOK studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas.
Studded tubes are a type of metal tube with studs welded onto the metal surface. These studs are arranged in a specific formation throughout the length of the tube. They are often used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating applications.
Studded tubes offer several key benefits:
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil
- Increased film heat transfer coefficient of flue gas to the furnace tube
- Improved efficiency in heat recovery processes and direct flame hostile atmospheres
- Reduced amount of bare pipes required — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes
- Ideal for processes where dirty fuels are used and harsh environments in terms of temperature and/or corrosion
Studded fin tube is a standard frequency electric-resistance-welded studded type surface. It is normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important process parameters influencing high-frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding the optimal process parameters depends on your specific equipment, the materials involved, and the specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you require.
High-frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials.
Using a high-frequency electromagnetic field, the material is heated and pressure is added to melt and fuse the two materials together. No external heat is applied; instead, the heat is generated within the materials. During cooling under continued pressure, the materials are fused together and a weld is created, resulting in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to highly corrosive environments and where very dirty gas streams require frequent or aggressive cleaning.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube