Customized Resistance Welding Studded Tube and Studded Fin Tube for Air Coolers
Air Coolers Studded Tube
,Resistance Welding Studded Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff members.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines, including 1 imported McElroy production line from the United States
- Annual production capacity of 12 million meters or more
Quality is our eternal pursuit. Our meticulous production workshop, standardized management system, and systematic quality assurance represent DELLOK (YONGHUI)'s commitment to quality. Quality control is not limited to final inspection — it extends throughout the entire production process. We implement a comprehensive quality control and assurance system, with each batch of pipes sampled, tested, and recorded as a guarantee for the final product.
Resistance welding of studs onto bare tubes is the process used to create studded fin tubes. The fins are produced through electrical resistance welding of the fin material — essentially a stud or rod — welded to the tube at its base.
Current is directed through the tube and the stud bases. The studs are formed in specific shapes to facilitate the welding process. During the finning operation, each stud is manually forced onto the tube at the welding site, resulting in a very strong mechanical bond. Studded fin tubes are well-suited for high-pressure and high-temperature applications. The mechanical bond is robust enough for use in environments subject to significant mechanical pressure and stress during operation or cleaning.
Fin tubes are used in finned pipes, air coolers, heat exchangers, and other applications, and are favored in industries such as petrochemical refineries, power plants, chemical processing, and steel plants.
Steel studs are automatically resistance welded to the tube, producing high-quality forge welds. This welding process enables the combination of any grades for studs and tube — carbon steel, low alloy steel, stainless steel, and high nickel alloys.
Due to their high rigidity, studded tubes can be used even under extreme temperature and pressure conditions.
- Manufacturing Process: Electric Resistance Welding
- Fin-to-Tube Bond: Excellent
- Heat Transfer Efficiency: Excellent
- Mechanical Resistance: Excellent — can be frequently cleaned with high-pressure jets, unlike other fin tubes, thereby reducing downtime and extending overall service life
- Corrosion Protection: Provides excellent corrosion protection to the base tube since the studs entirely cover the base tube (except bare ends)
- Temperature Range: Dependent on the properties of the fin (stud) and pipe materials
Steel studded tubes are used instead of finned tubes for heat transfer in processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to highly corrosive environments and where very dirty gas streams require frequent or aggressive cleaning.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube OD | 25–273 mm | 1"–10" (NPS) |
| Tube Wall Thickness | 3.5–28.6 mm | 0.14"–1.1" |
| Tube Length | ≤25,000 mm | ≤82 ft |
| Stud Thickness | 6–25.4 mm | 0.23"–1" |
| Stud Height | 10–35 mm | 0.4"–1.38" |
| Stud Pitch | 8–30 mm | 0.3"–1.2" |
| Stud Type | Cylindrical, Elliptical, Lens type | |
| Stud-to-Tube Surface Angle | Vertical or Angular | |
| Component | Material Options |
|---|---|
| Stud Material | Carbon Steel (most common grade: Q235B); Stainless Steel (most common grades: AISI 304, 316, 409, 410, 321, 347); Alloy Steel |
| Tube Material | Carbon Steel (most common grade: A106 Gr.B); Stainless Steel (most common grades: TP304, 316, 321, 347); Alloy Steel (most common grades: T/P5, 9, 11, 22, 91) |
| Type of Service | High temperature |
Studded tubes serve as a substitute for finned tubes in heat transfer applications within the petrochemical industry — generally in fired heaters and boilers where the surface is exposed to highly corrosive environments and where heavy soot formation requires frequent or aggressive cleaning.
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, with stepping motor and indexing brake motor. All welding parameters — including number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is ensured through process-specific parameter settings.
The automatic stud feeder was developed by our engineers, combining extensive experience in extended surface manufacturing with the most modern control technology available on the market. This technology has enabled more efficient production and consistent welding quality.
Studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas.
Studded tubes are a type of metal tube with studs welded onto the tube surface. These studs are arranged in a specific formation along the length of the tube. They are commonly used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating applications.
Studded tubes offer several key benefits:
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil
- Increased film heat transfer coefficient of flue gas to the furnace tube
- Improved efficiency in heat recovery processes and direct-flame hostile atmospheres
- Reduced amount of bare pipe required — the heat transfer surface of one studded pipe is equivalent to that of 4 to 10 bare pipes
Studded pipes are ideal for process applications using dirty fuels and harsh environments in terms of temperature and/or corrosion. Studded fin tube is a standard frequency electric-resistance-welded studded type surface, normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important process parameters influencing high-frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding optimal process parameters depends on your specific equipment, the materials involved, and specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times required, the stronger the electrical power / HF generator needed.
High-frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two plastic parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials.
Using a high-frequency electromagnetic field, the material is heated and pressure is applied to melt and fuse the two materials together. No external heat is applied; instead, heat is generated within the materials. During cooling under continued pressure, the materials fuse together and a weld is created, resulting in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to highly corrosive environments and where very dirty gas streams require frequent or aggressive cleaning.
Quality is our highest priority. We control quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube and strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tube dimension and visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube