Customized Polishing High Strength Studded Tube and Nailhead Tube for Industrial Heat Transfer
Carbon Steel Welded Nailhead Tube
,Welded Nailhead Tube
,ASTM Carbon Steel Tube
DELLOK Carbon Steel Welded Nailhead Tube (also known as studded tube) is a high-performance extended-surface heat transfer product engineered for demanding industrial environments. Manufactured by YONGHUI RADIATING PIPE MANUFACTURING CO., LTD., this customized solution delivers reliable performance in furnaces, gas turbines, fired heaters, and other applications where surfaces are exposed to highly corrosive environments and dirty gas streams requiring frequent or aggressive cleaning.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing enterprise with 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA) with an annual production capacity of over 12 million meters
Quality is our eternal pursuit. Our meticulous works, standardized management system, and systematic quality assurance represent DELLOK's best commitment to quality. Quality control is not limited to final inspection — it extends throughout the entire production process. Each batch of pipes is sampled and tested, with records maintained as a quality guarantee for the final product.
Steel studded tubes are used instead of fin tubes for heat transfer in processing industries, generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
The steel studs (welded stainless tube) are automatically resistance welded to the tube, producing high-quality forge welds. The welding process enables the combination of any grades for studs and tube (black welded pipe): carbon, low alloy, stainless steels, and high nickel alloys. Alloy steel pipes are stress-relieved after studding, according to the relevant specifications for the class and grade of steel used.
Because of their relative ease of cleaning, studded tubes (stainless steel welded tube) or nailhead pipes (weld galvanized pipe) are used in furnaces and fired heaters as an alternative to high-frequency welded finned tubes wherever the process application is such that heavy fouling of the external surface may occur.
| Parameter | Specification |
|---|---|
| Tube O.D. | 25–273 mm |
| Tube Wall Thickness | 3.5–28.6 mm |
| Tube Length | ≤ 25,000 mm |
| Stud Height | 10–35 mm |
| Stud Pitch | 8–30 mm |
Welding tests are carried out as a matter of course to ensure the effectiveness of the stud-to-pipe bond. Heat treatment of the completed studded tube is carried out where necessary. Should fouling eventually reduce the process performance of the equipment, the studded surface can be cleaned efficiently by shot blasting without damage to the materials.
An electric current is applied by connecting the stud and tube, and the resistance in this circuit produces the heat necessary for welding. Maximum resistance — and therefore maximum heating — occurs at the interface between the stud and the tube. Pressure to forge the stud and tube together at the point of maximum heating is applied by various forms of tooling. These resistance welding processes produce a strong metallurgical bond between the stud and the tube while minimizing the heat-affected zone (HAZ) in the tube. The use of pressure to forge the fin and tube together helps minimize the heat input necessary to make the weld. This product is used in fired heaters under very high pressure and temperature, mainly in petroleum refineries.
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, stepping motor, and indexing brake motor. All welding parameters — such as number of studs, pitch, and compensation coefficient — are input via a human-machine interface (HMI). Product quality is guaranteed by settings according to process requirements.
The automatic stud feeder was developed by our engineers, combining our extensive experience in manufacturing extended surface with the most modern control technology available in the market. This technology has benefited us with more efficient production and consistent welding quality.
Murphy's studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas. They are used as a substitute for finned tubes for heat transfer in the petrochemical industry, generally in fired heaters and boilers where the surface is exposed to a very corrosive environment and where very dirty soot formation requires frequent or aggressive cleaning.
Studded tubes are a type of metal tube with studs welded onto the metal tube. These studs are arranged in a specific formation throughout the length of the tube. They are often used in boilers and refineries. As they increase the surface area for higher heat transfer, they are used for reheating.
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe.
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil.
- Increases the film heat transfer coefficient of flue gas to the furnace tube.
- Increases efficiency in the process of heat recovery and direct flame hostile atmospheres.
- Reduces the amount of bare pipes used in these processes (heat transfer surface of one studded pipe is equivalent to the surface of 4 to 10 bare pipes).
- Ideal for process applications where dirty fuels are used and harsh environments exist in terms of temperature and/or corrosion.
Studded fin tube is a standard frequency electric-resistance-welded studded type surface. It is normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important factors / process parameters influencing high-frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding the optimal process parameters will depend on your specific equipment, the materials involved, and the specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule, the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you need.
High-frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two plastic parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials.
Using a high-frequency electromagnetic field, the material is heated and pressure is added to melt and fuse the two materials together. No outside heat is applied; instead, the heat is generated within the materials. During cooling (under continued pressure), the materials are fused together and a weld is created. This results in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in processing industries, generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
We always put quality as the most important thing for customers, and we control quality from raw material inspection and production checking through to water pressure testing and strength testing. A third party can also be authorized to perform inspection. Our quality documentation includes:
- Incoming inspection report for bare tube & strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tubes dimension & visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube