Petrochemical Industry Carbon Steel Studded Tube and Studded Pipe with Polishing for High Strength Heat Transfer
Carbon Steel Studded Tube
,Polishing Carbon Steel Studded Tube
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) is a leading manufacturer of carbon steel studded tubes engineered for the petrochemical industry. Our studded tubes deliver superior heat transfer performance in the most demanding fired heaters, boilers, and convection sections — even under extreme temperature, pressure, and corrosive conditions.
Established in 2002 and located in Jiangsu, China, DELLOK has grown into a substantial manufacturing operation with 66 million yuan in fixed assets, more than 200 employees, and 33 technical staff. Our production infrastructure includes:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from McElroy (USA)
- Annual production capacity of 12 million meters and above
Quality is our eternal pursuit. Our meticulous works, standardized management system, and systematic quality assurance represent DELLOK's best commitment to quality. Quality control is not limited to final inspection — it is embedded throughout the entire production process. Each batch of pipes is sampled and tested, with records maintained as a quality guarantee for the final product.
Steel studs are welded onto the base tube to create an extended surface that significantly enhances heat transfer efficiency. Studded tubes are used as a superior substitute for finned tubes in the petrochemical industry, particularly in fired heaters and boilers where surfaces are exposed to highly corrosive environments and where dirty soot formation requires frequent or aggressive cleaning.
- Carbon Steels (Black Welded Pipe)
- Low Alloy Steels
- Stainless Steel (Stainless Steel Welded Tube)
Cylindrical, elliptical, or lens type.
Furnaces, chemical industry, petrochemical industry, power stations, and other applications where liquid media under high pressure must be heated or cooled.
Studs are fully automatically welded onto the tube by resistance welding, ensuring consistent weld quality and production efficiency.
Due to their high rigidity, studded tubes can be used even under extreme temperature and pressure conditions.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube O.D. | 12~273 (mm) | 3/8"~10" (NPS) |
| Tube Wall Thickness | 2.11~25.4 (mm) | 0.08"~1" |
| Tube Length | ≤12000 (mm) | ≤39 ft |
| Fin Thickness | 1.0~1.5 (mm) | 0.04"~0.06" |
| Fin Height | 5~25 (mm) | 0.2"~0.98" |
| Fin Quantity | 1U~36U | 1U~36U |
The studs are automatically welded to the tube by an electric resistance welding machine. The welding process is controlled by a PLC program, with stepping motor and indexing adopting a brake motor. All welding parameters — including number of studs, pitch, and compensation coefficient — are input via a Human Machine Interface (HMI). Product quality is guaranteed by settings configured according to precise process requirements.
The automatic stud feeder was developed by our engineers, combining our extensive experience in manufacturing extended surface products with the most modern control technology available on the market. This technology delivers more efficient production and consistent welding quality.
DELLOK studded tubes are generally installed in convection sections and boilers where the surface is exposed to severe operating conditions involving dirty flue gas. They are widely used in furnaces, gas turbines, fired heaters, and furnace applications across the processing industries.
Studded tubes are a type of metal tube with studs welded onto the base tube. These studs are arranged in a specific formation throughout the length of the tube. They are commonly used in boilers and refineries. Because they increase the surface area for higher heat transfer, they are used for reheating applications.
Studded tubes offer several significant advantages:
- Heat exchange efficiency is equivalent to 2–3 times that of a bare pipe.
- Easier cleaning, especially for operating cases with very dirty flue gas produced by burning heavy oil, diesel, or residual oil.
- Increased film heat transfer coefficient of flue gas to the furnace tube.
- Improved efficiency in heat recovery processes and direct flame hostile atmospheres.
- Reduced amount of bare pipes required — the heat transfer surface of one studded pipe is equivalent to the surface of 4 to 10 bare pipes.
Studded pipes are ideal for process applications where dirty fuels are used and harsh environments exist in terms of temperature and/or corrosion. The studded fin tube is a standard frequency electric-resistance-welded studded type surface, normally manufactured with round carbon steel studs on carbon, alloy, or stainless steel tubes with diameters from 1.5" to 12.75".
The four most important process parameters influencing high frequency welding are:
- Electrical power
- Pressure applied
- Welding time
- Cooling time
Finding the optimal process parameters depends on your specific equipment, the materials involved, and the specific geometries including thickness and area to be welded. Achieving optimal results is often an experimental process guided by experience. As a guiding rule: the thicker the material and the shorter the weld times you need, the stronger the electrical power / HF generator you require.
High frequency welding (often abbreviated HF welding or RF welding) is a manufacturing process where two plastic parts are welded together using an electromagnetic field. The resulting joint can be very strong — often close to the original strength of the materials joined. In some scenarios, the weld can be even stronger than the original materials.
Using a high frequency electromagnetic field, the material is heated and pressure is applied to melt and fuse the two materials together. No external heat is applied; instead, the heat is generated within the materials. During cooling under continued pressure, the materials are fused together and a weld is created, resulting in a very strong bond between the two parts.
Studded tubes are used instead of finned tubes for heat transfer in the processing industries — generally in furnaces, gas turbines, fired heaters, and furnace applications where the surface is exposed to a very corrosive environment and where very dirty gas streams require frequent or aggressive cleaning.
We always put quality first for our customers, controlling quality from raw material inspection through production checking to water pressure testing and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube & strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tubes dimension & visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube