High Temperature Carbon Steel Longitudinal Finned Tube Customized Length Brown Fintube for Heat Exchanger
Carbon Steel Brown Finned Tube
,ASTM Brown Finned Tube
The DELLOK High Temperature Carbon Steel Brown Finned Tube is a longitudinal finned tube engineered for superior heat transfer performance in demanding industrial applications. Manufactured through high-frequency resistance welding, this product delivers reliable thermal efficiency, structural rigidity, and long service life in shell-and-tube and multi-pipe heat exchanger systems.
Dellok (YONGHUI Radiating Pipe Manufacturing Co., Ltd.) was established in 2002 and is located in Nanjing, China. In 2022, the company joined HARBIN AIR CONDITIONING CO., LTD., becoming one of the most professional industry manufacturers in China.
After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff. Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of 12 million meters and above
Quality is the theme of our eternal pursuit.
Like welded spiral finned tubes, this welded configuration can be used for practically any heat transfer application. The choice of a longitudinal fin tube versus a helical finned tube is governed mainly by geometric considerations. For example, some heater configurations consist of finned tubes inserted inside other tubes — longitudinal finned tubes are the obvious choice for such applications.
In other cases, users prefer a longitudinal fin tube for installations where the tube will be oriented vertically — the fin orientation facilitates fluid drainage on the fin side of the tube. The longitudinal fin configuration is most commonly used in shell-and-tube applications such as double-pipe and multi-pipe heat exchangers, where the longitudinal fin tube is telescoped inside the bore of a larger tube shell. Heat is transferred between the fluid passing through the bore of the fin tube and the fluid passing through the bore of the shell. Fluids passing through the bore of the shell are forced between the longitudinal fins. In this case, a helical fin would block the flow of the fluid rather than allowing it to run between the fins.
Longitudinal finned tubes are produced by resistance welding fins in the longitudinal direction along the length of the tube (welded steel pipe). The fin strip is first formed into a U-shaped channel, such that each leg of the U will form a fin. The channels are cut to the appropriate length, then oriented along the length of the tube (brown fin tube) and resistance welded in place. The channels are welded in pairs, diametrically opposed — therefore the number of fins specified must always be a multiple of four.
For a given pipe (carbon steel welded pipe) or tube size, the desired heat transfer surface area per unit length of tube can be obtained by specifying the appropriate fin height and number of fins. The maximum number of fins is dependent upon the tube outside diameter — larger OD tubes can accommodate a greater number of fins.
| Parameter | Metric | Imperial |
|---|---|---|
| Tube O.D. | 12 ~ 273 mm | 3/8" ~ 10" (NPS) |
| Tube Wall Thickness | 2.11 ~ 25.4 mm | 0.08" ~ 1" |
| Tube Length | ≤ 12000 mm | ≤ 39 ft |
| Fin Thickness | 1.0 ~ 1.5 mm | 0.04" ~ 0.06" |
| Fin Height | 5 ~ 25 mm | 0.2" ~ 0.98" |
| Fin Quantity | 1U ~ 36U | 1U ~ 36U |
Longitudinal finned tubes are produced by resistance welding fins in the longitudinal direction along the length of the tube. The fin strip is first formed into a U-shaped channel, such that each leg of the U will form a fin. The channels are cut to the appropriate length, then oriented along the length of the tube and resistance welded in place. The channels are welded in pairs, diametrically opposed — therefore the number of fins specified must always be a multiple of four.
For a given pipe or tube size, the desired heat transfer surface area per unit length of tube can be obtained by specifying the appropriate fin height and number of fins. The maximum number of fins is dependent upon the tube outside diameter — larger OD tubes can accommodate a greater number of fins.
Each tube, except stainless material, is polished by a polishing machine to a near-white condition before welding. After welding, the finned tubes are coated for transportation and site storage purposes. The standard coating provides protection for a period of 3 months. Any other coating material for longer protection is also available per client requirements.
Finned tubes are particularly useful in air heat exchangers, where heat transfer takes place between a liquid and a gas. Because the heat transfer coefficient on the air side is lower, a finned tube is exceptionally helpful — it increases the surface area and thus helps achieve faster heat transfer between the components.
The fin length calculator uses the formula: Fin Length = (Perimeter − (2 × Height)) / (4 × Number of Fins). The fin length formula defines the length of fins required for effective heat transfer.
A longitudinal finned tube, also called a brown fin tube, is produced by high-frequency resistance welding fins in the longitudinal direction along the length of the tube.
- Improves heat transfer efficiency within an efficient space
- Reduces installation space required for heat transfer surfaces
- Reduces equipment cost and offers high operational reliability
- Reduces pressure drop on the tube side and lowers operating costs
- Improves the stiffness of the steel tube and enhances seismic performance
- Enhances heat transfer while reducing flow resistance and metal consumption
We supply longitudinal finned tubes for:
- Double-pipe heat exchangers
- Multi-tube heat exchangers
- Fire-rated heaters
- Gas coolers
- Tank heaters
We are able to accommodate the requirements of various industries, including oil, power, chemical, and petrochemical.
We always put quality first for our customers and control it from raw material inspection through production checking to water pressure and strength testing. Third-party inspection can also be authorized. Our quality documentation includes:
- Incoming inspection report for bare tube and strip
- Mill test certification for bare tube
- Mill test certification for fin
- Mill test certification for finned tube
- Finned tube dimension and visual inspection reports
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube