SUS304 Stainless Steel Laser Welding Fin Tube Coil for High Efficiency Heat Transfer Finned Tube
Stainless Steel Fin Tube Coil
,SUS304 Fin Tube Coil
,Laser Welding Spiral Finned Tube
DELLOK SUS304 Stainless Steel Laser Welding Fin Tube Coil
Laser welded finned tubes are processed fully automatically by a high-precision laser welding machine. The process uses a leading technology that irradiates a high-intensity laser beam onto the metal surface. Through the interaction of laser and metal, the metal absorbs the laser energy and converts it into heat, melting the metal, forming cooling crystals, and firmly welding the fins to the tube.
Laser welded finned tubes feature a fully automatic welding process that saves labor costs. The laser-welded fins are firm and high-strength, and are tested for tensile strength. Overall, the efficiency of laser welding is higher than conventional methods.
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and has 33 technical staff members.
We operate 4 aluminum processing production lines with an annual processing capacity of over 20,000 tons, 5 tube-drawing production lines, and 47 fin tube production lines — including 1 imported production line from the American brand McElroy — with an annual production capacity of 12 million meters and above.
Quality is the eternal pursuit of our success. Meticulous workmanship, a standardized management system, and systematic quality assurance are DELLOK (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection but extends throughout the entire production process. We implement a comprehensive quality control and assurance system: each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
- The laser welding finned tube machine offers a high degree of automation, with the welding of the fin to the tube and the winding of the tube synchronized.
- 100% welding rate — the laser-welded finned tube and fins are strong, with welding strength exceeding 600 MPa.
- The precision of the laser welding tube finishing machine is up to 0.05 mm.
- Zero contact resistance, achieving high heat transfer efficiency of the spiral finned tube through laser welding.
- Production costs are reduced. Laser-welded finned tubes allow a smaller fin spacing of less than 2.5 mm. Compared with high-frequency welded spiral finned tubes, the heat transfer area is increased by approximately 50%, reducing material costs and the volume of the heat exchanger.
- The advantages over conventional MAG / HF welding are decisive. The complete connection between the fin and the base tube delivers excellent heat transfer, and the thermal performance of the fin tube is increased by 2.5 times. Continuous welding prevents the notch effect, thereby avoiding the formation of V-corrosion and cracks under conditions where the finned tube may swing. Heating of base metals during welding is low, and the travel speed is up to 20 m/min. The heat-affected zone in the base tube is minimized, avoiding complete melting of the tube and the related metallurgical transformation of the parent metal.

- Cooling towers or cooling water recooling plants with dry, dry/wet, or wet operation
- Flue gas cooling and heating in flue gas desulfurisation scrubbers (FGD) and nitrogen removing plants (DENOX)
- Heat exchangers of all kinds for cooling and heating of liquids and gases
- Heat exchangers for nitric acid (HNO₃) plants, e.g., for the fertilizer industry
- Flue gas coolers
- Primary heat exchangers in gas heating boilers
- Secondary heat exchangers for domestic water heating in condensing boilers
- Heat exchangers for gas cooling of industrial furnaces
- Heat exchangers for tank heating
- Oil coolers for vacuum plants, ship plants, pumps, etc.
- Heat exchangers for oil preheating

The following dimensions and materials (steel and aluminum) are available from stock and can be combined:


Tubes can, among others, be manufactured in the following dimensions:


A: Generally, samples need 1–3 days, and mass production needs 15–30 days, also depending on your request.
A: We provide a one-year warranty for our products.
A: Trade assurance, TT, and Western Union.
A: Air freight, sea freight, express delivery, etc. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube