Customized Copper Steel Extruded Fin Tube 1000mm Length for Heat Exchanger Finned Tube Applications
Steel Performance Extruded Fin Tube
,Steel Performance Fin Tube
,Customized Extruded Fin Tube
Customized Extruded Fin Tube with Copper and Steel Material Performance
DELLOK (YONGHUI RADIATING PIPE MANUFACTURING CO., LTD.) was established in 2002 and is located in Jiangsu, China. After years of development, the company now holds 66 million yuan in fixed assets, employs more than 200 people, and retains 33 technical staff members.
Our production capabilities include:
- 4 aluminum processing production lines with an annual processing capacity exceeding 20,000 tons
- 5 tube-drawing production lines
- 47 fin tube production lines
- 1 imported production line from the American brand McElroy
- Annual production capacity of over 12 million meters
Quality is the eternal pursuit of our company. Our production workshop, meticulous workmanship, standardized management system, and systematic quality assurance represent Dellok (YONGHUI)'s best commitment to quality. Quality control is not limited to final inspection — it extends throughout the entire production process. We implement a comprehensive quality control and assurance system. Each batch of pipes is sampled and tested, and records are kept as a quality guarantee for the final product.
The Wrap-On (W/O) Fin, or "L" footed fin, is characterized as an L fin and is widely used throughout the world. This fin is considered an interference-fit type and is limited to light-duty applications. Typically, this fin is produced from aluminum or copper fin strip. This fin type is not suitable for carbon steel or stainless steel fin materials, as the material is too hard for the formation of the characteristic L foot.
The foot of the fin is formed by pulling the strip through a two-stage preformer set. The first stage rolls the fin to a 45-degree foot, and the second stage rolls it to a true 90-degree foot. The tooling controls the fin height as specified. As a result, each combination of FPI (pitch) and fin strip thickness requires a specific strip width.
The Overlapped Footed Fin (OLFF) is characterized as a double LL fin and is widely used throughout the world as an alternative to the extruded fin. This fin is considered an interference-fit type and is used in corrosive applications where protection of the base tube is required. The double LL coverage of the base tube represents a double strip thickness coverage of the base tube.
Typically, this fin is produced from aluminum or copper fin strip. This fin type is not suitable for carbon steel or stainless steel fin materials, as the material is too hard for the formation of the characteristic LL foot. The foot of the fin is formed by pulling the strip through a two-stage preform roller set. By preforming the foot of the fin into a "joggle" or a one-thickness offset, it is possible to place the heel of one fin on the toe of the adjacent fin. The preformers shape the foot to allow the fins to fit together on the surface of the tube for continuous contact with the base tube, forming a seal that protects the base tube from atmospheric corrosion.
The Knurled Footed Fin is characterized by increased tube and fin surface area due to the knurled surface on the fin foot and tube. The fin is considered an interference-fit type, and because of the knurls, some heat transfer specialists give the fin added performance ratings due to a mechanical-type bond of the fin material to the tube wall surface.
Typically, this fin is produced from aluminum or copper fin strip. This fin type is not suitable for carbon steel or stainless steel fin materials, as the material is too hard for the formation of the characteristic L or LL foot. Knurling depth in the tube wall is affected by the hardness of the tube material chosen. The fin, whether W/O or OLFF, is formed using standard fin height hardware.
Applied fin tube is made with strip wrapped under tension around the base of the tube. Fins are welded to the base tube at the strip ends.
The core tube is extensively protected against corrosion by the fin foot, and finning of very thin-walled tubes is possible.
| Property | Rating |
|---|---|
| Atmospheric Corrosion Resistance | OK |
| Mechanical Resistance | Poor |
| Fin Contact | Interference Fit |
| Fin-to-Tube Bond | Moderate |
| Heat Transfer Efficiency | Moderate |
- Petroleum, chemical, and petrochemical process industries
- Natural gas treatment
- Steel industry: blast furnace and converter systems
- Power generation: steam turbine exhaust condensing
- Contact condensing with cooling of circulating condensate
- Fossil and nuclear power plants
- Air conditioning (Freon, ammonia, propane)
- Incineration of household refuse
- Compressor coolers, and more
| Fin Type | L / LL / KL Finned Tube |
|---|---|
| Tube Material | Carbon steel, stainless steel, copper, aluminum |
| Fin Material | Copper, aluminum |
| Fin Tube Length | No limit |
| Working Temperature | 230°C |
| Features | Adopting the winding process, the production efficiency is high, the lamella distance is uniform, the heat transfer is good, the finization ratio is high, and the base tube can be protected from air erosion. |
A finned tube is a tube with small fins around its outer surface. These fins act as a filter and a mechanism for transferring heat from the material inside the tube to or from the outer space. Finned tubes are used in applications where heat is transferred from a hot fluid to a cooler fluid through the wall of the tube. The rate at which this heat transfer occurs depends on three factors:
- The difference in temperature between the two fluids
- The coefficient of heat transfer between each fluid and the wall
- The surface area of fluid exposure
Adopting the winding process, the production efficiency is high, the lamella distance is uniform, heat transfer is good, the finization ratio is high, and the base tube can be protected from air erosion. The aluminum or copper fin is folded into an L shape and continuously spirally wound on the outer surface of the base tube under tension.
Maximum working temperature: 150°C (302°F). Acceptable for atmospheric corrosion resistance; poor mechanical resistance. Commonly used heat sink materials are aluminum and copper.
Building on the L-shaped foundation, the fin root completely covers the outer surface of the base tube. To some extent, this fin type guarantees better corrosion resistance. Maximum working temperature: 180°C (356°F). Acceptable for atmospheric corrosion resistance; poor mechanical resistance. Commonly used heat sink materials are aluminum and copper.
Before the fins are continuously wound on the surface of the steel pipe, the outer surface of the base pipe undergoes a knurling process. After the fins are wound, the root of the fin attached to the steel pipe is also knurled to strengthen the steel pipe and the combination of fins. For this reason, this fin type ensures better heat transfer characteristics than L and LL fins. Maximum working temperature: 260°C (500°F). Acceptable for atmospheric corrosion resistance; poor mechanical resistance. Commonly used heat sink materials are aluminum and copper.
Mainly used in air coolers in petrochemical, electric power, paper making, tobacco, building heating, and other industries. Also used in air heaters and air heaters in spray drying systems such as vegetable protein and starch in the food industry. Additional applications include blast furnace and converter systems, power generation (condensate exhaust gas discharged from steam turbines, condensate contact cycle cooling condensation, fossil and nuclear power plants), air conditioners (Freon, ammonia, propane), waste incineration equipment, compressor coolers, and more.
We customize finned tubes according to each customer's individual requirements. For more details about L/LL/KL finned tubes, please inquire with us.
Q: What is your lead time for production?
A: Generally, samples need 1–3 days; mass production needs 15–30 days, also depending on your request.
Q: What is the warranty for your products?
A: We provide a one-year warranty for our products.
Q: What payment terms do you accept?
A: Trade assurance, TT, and Western Union.
Q: What are the modes of transportation for machines?
A: Air freight, sea freight, express delivery, and more. We will choose the most suitable transportation method according to your requirements.
TP304L Resistance Welded Perforated Fins Longitudinal Finned Tube for Heat Exchangers
DELLOK YONGHUI Cold Drawn Carbon Steel Fin Height 16.5mm Extruded Fin Tube
DELLOK YONGHUI Chemical Industry Stud SA335 P91 Carbon Steel Seamless Tube